Rolex Daytona strap size & fit guide: lug width, versions and what fits
Updated November 2026 · Facts below are taken from Lugline product data for the Rolex Daytona.
Short answer: Lugline makes 54 straps for the Rolex Daytona in 20 mm / 21 mm lug widths, with curved ends, shaped to sit flush against the case and integrated ends that attach to the case in place of the bracelet. Prices start at $42. The right width depends on which version you own – see the table below.
Which Rolex Daytona strap size do I need?
Lugline straps are made per watch version. Match the version printed on your product page to the lug width below.
| Watch version (as listed on Lugline) | Lug width of the strap | Straps available |
|---|---|---|
| Rolex Daytona | 20 mm | 40 |
| Rolex Oysterflex – Daytona, Yacht-Master & Sky-Dweller | 20 mm / 21 mm | 10 |
References named on Lugline Rolex Daytona product pages include: 16520, 116520, 116500, 116500LN.
Not sure which version you have? Use the Strap Finder (brand → model → reference) or read how to measure lug width.
What kind of strap end fits the Rolex Daytona?
Curved-end straps (41 straps) are shaped to follow the case so there is no gap between strap and lugs. Integrated straps (13 straps) replace the bracelet and attach directly to the case, keeping the original look.
Can I keep my original buckle or clasp?
Yes. Most Lugline Rolex Daytona straps offer a No Buckle option, so you can fit your own pin buckle. If you want a new one, the buckle options on these straps are: Silver Deployant, Gold Deployant, Rose Gold Deployant, Black Deployant, Silver.
How long are the straps?
Strap lengths listed on Lugline product pages for this model (long piece + short piece): 95 mm + 60 mm (19 straps); 125 mm + 75 mm (19 straps).
Materials and prices
Materials across the 54 Rolex Daytona straps: Rubber (49), FKM Rubber (5). Prices range from $42 to $110. 2 are currently reduced. Browse all in straps compatible with Rolex Daytona.
Popular Lugline straps for the Rolex Daytona
FKM Rubber Strap, Black – compatible with Rolex Daytona20 mm$42 
Rubber Strap – compatible with Rolex Daytona 116500LN Panda$42 
FKM Rubber Strap, White – compatible with Rolex Daytona20 mm$66
Deployant Rubber Strap, Yellow – compatible with Rolex Daytona20 mm$82
FAQ
What lug width does the Rolex Daytona use?
Lugline Rolex Daytona straps are made in 20 mm / 21 mm, depending on the version. See the version table above to match yours.
Do Lugline Rolex Daytona straps come with spring bars?
Spring bars are included with Lugline straps, so no watchmaker is needed to swap them.
Can I use my original buckle with a Lugline Rolex Daytona strap?
Yes. Choose the No Buckle option and fit your own pin buckle.
Do I need to remove the bracelet to fit an integrated Rolex Daytona strap?
Yes. Integrated straps replace the bracelet and attach directly to the case.
Will a curved-end strap leave a gap on my Rolex Daytona?
No. Curved ends are shaped to the case of the listed versions, so the strap sits flush against the lugs.
Is a watch included?
No. Lugline sells straps only. Brand and model names are used to describe compatibility; Lugline is independent and not affiliated with any watch manufacturer.
Related guides
Shop straps for Rolex Daytona · Open the Strap Finder
Brand and model names are used only to describe compatibility. Lugline is an independent brand and is not affiliated with, endorsed by or sponsored by any watch manufacturer. Watch not included.